ePLA-ST
ePLA-ST
Product Description :
It has the characteristics of high impact resistance, high elongation at break, high bonding strength and high printing accuracy. There is no need to heat the bed or print in a closed chamber, and no warping when print large models.
It has the characteristics of high impact resistance, high elongation at break, high bonding strength and high printing accuracy. There is no need to heat the bed or print in a closed chamber, and no warping when print large models.
Comparison of physical performance indicators：
|
Project |
PLA |
PLA+ |
ePLA-ST |
|
Appearance |
white |
white |
white |
|
Tensile Strength |
78Mpa |
63Mpa |
34.3Mpa |
|
Elongation at break |
14% |
20% |
90% |
|
Bending strength |
90Mpa |
74Mpa |
43Mpa |
|
Flexural modulus |
1984Mpa |
1934Mpa |
1477Mpa |
|
Notch impact |
5.6 |
9 |
63 |
Printing parameters：
|
Material name |
ePLA-ST |
|
Recommended printing temperature |
210-230℃ |
|
Bottom plate |
45 - 60°C(Masking paper, PVP solid glue, glass board, carbon fiber board, PEI) |
|
Fan |
100% |
|
Printing speed |
40-100mm/s |
Print performance comparison：
|
PLA |
PLA+ |
ePLA-ST |
Conclusion |
|
|
Surface finish |
Normal |
No obvious layering |
No obvious layering |
ePLA-ST≈PLA+>PLA |
|
Hole column fitting model (The smaller the value, the better) |
0.3mm |
0.3mm |
0.3mm |
ePLA-ST=PLA+=PLA |
|
Hanging model (The larger the value, the better) |
<45° |
<60° |
<70° |
ePLA-ST>PLA+>PLA |
|
Suspension bridge (The larger the value, the better) |
40mm |
50mm |
50mm |
ePLA-ST=PLA+>PLA |
Note: Printing test conditions: nozzle 215℃; bed 45℃; speed 40mm/s
